En

Industrial Fan Applications: Axial and Centrifugal Fans Across Sectors

Monday, 09 November 2026
Industrial Fan Applications: Axial and Centrifugal Fans Across Sectors

An industrial fan is defined by the application it serves and by the environment it operates in. Flow rate and pressure are specified by the process, and the fan must be engineered to match them, together with the temperature, dust load and chemical nature of the fluid it conveys and site conditions such as altitude and humidity. Reading industrial fan applications correctly means starting from those conditions, not from a catalogue page. This guide maps the main industrial sectors to the right fan family and the executions they call for.

 

Centrifugal fan applications: where pressure and resistance demand precision

industrial centrifugal fan ch series

Ch series

Versatility, robustness, and reliability define these fans, making them suitable for a wide range of standard and special industrial applications.

Discover more
industrial centrifugal fan cht series

ChT series

The ChT series is a double-inlet fan designed for air-conditioning and ventilation applications, providing a wide range of flow and pressure performances thanks to its high level of standardization.

Discover more
industrial centrifugal fan k series

K series

The K series is designed for conveying air, dusty gases, granular materials and long fibres, ensuring high versatility and efficiency through its optimized scroll housing and three available impeller configurations.

Discover more
industrial centrifugal fan cb series

CB series

The CB series includes direct-driven centrifugal fans with either backward flat-blade impellers (CBB) or backward-curved impellers for higher efficiency (CBS).

Discover more
industrial centrifugal fan n series

N series

The N series consists of direct-driven centrifugal fans designed for versatility and reliability in industrial ventilation systems with low airflow and moderate pressure.

Discover more
industrial centrifugal fan z series

Z series

The backward flat-blade fan delivers high efficiency and versatility, with configurable direct or transmission drives, multiple material options, surface treatments, and robust design for operation up to 300°C.

Discover more
industrial centrifugal fan evo series

EVO series

The backward flat-blade fan ensures optimal efficiency and reliable direct-drive operation, engineered for robust performance in temperatures up to 400°C.

Discover more
industrial centrifugal fan s series

S series

The S fans are designed for heavy-duty applications, available with direct or belt-driven drives, with 8 blades.

Discover more
industrial centrifugal fan m series

M series

The M series fans are designed for heavy-duty applications, available with direct or belt-driven drives, with 10 blades.

Discover more
industrial centrifugal fan x series

X series

The X fans are designed for heavy-duty applications, available with direct or belt-driven drives with 12 blades

Discover more
industrial centrifugal fan h series

H series

The backward-curved or radial blade fan, delivers optimal performance, flexible drive options, and robust operation up to 300°C, with multiple materials and surface treatments for enhanced durability.

Discover more
industrial centrifugal fan ch series

AGRI series

Mobile centrifugal fans for agricultural applications

Discover more

Centrifugal fans are selected when pressure, not volume, drives the duty: where the airflow has to overcome high operating resistance, the centrifugal design delivers far higher static pressure than an axial fan. The fluid enters centrally, is accelerated by the impeller and leaves the tangential outlet: this is what lets the fan overcome long duct runs, filters and process equipment. 

 

Impeller geometry then follows the fluid: airfoil blades for clean air, backward-inclined blades from clean to dusty air, radial blades for dust, granular materials and fibres. When conditions turn extreme, CBI applies Heavy Duty construction, an approach rather than a series, with reinforced structures built for continuous operation.

 

 

Industrial centrifugal fan applications

These are the sectors where process duty, and therefore pressure, drives the selection:

Axial fan applications: where large-volume airflow is the priority

Axial fans are the answer when the installation requires moving large volumes of air across relatively low resistance. Air moves parallel to the shaft, blade pitch trades flow rate against pressure, and the fluid handled is typically clean or slightly polluted. Motor position sets the operating limits: a motor in the airflow restricts the temperature and corrosiveness the fan can tolerate, while a motor outside the airflow, with transmission, handles fluids up to 180 °C.

 

 

Industrial axial fan applications

Many installations use both families. The sectors below are those where moving large air volumes, or controlling smoke, is the main duty:

Applications requiring special executions

Some industrial fan applications are defined not by sector but by operating conditions that cut across all industries. A cement plant, a chemical process and a paint shop can share the same problem: an explosive atmosphere, a gas that must not leak, a fluid that corrodes steel, a temperature beyond the base design. 

 

CBI addresses these through special executions applied to the selected series: the series defines aerodynamic performance, the execution defines resistance to the operating environment. Availability varies by series and is stated on each product page.

 

  • ATEX execution: available on request for equipment destined for potentially explosive atmospheres, specified when the installation requires it;
  • insulated execution: factory-integrated rock wool insulation, also in a high-performance acoustic version with EPDM membrane, reduces noise emission and heat dispersion, prevents condensation and removes insulation work on site;
  • stainless steel AISI: AISI 304 and AISI 316 for corrosive environments, where carbon steel would itself become the point of failure;
  • gastight construction: seals the fan against the fluid it conveys, wherever process gases, corrosive gases or heavy dust loads would otherwise escape through standard joints;
  • high-temperature design: extends the operating envelope beyond the base configuration of the series, so the same aerodynamics can serve far harsher thermal duty.

 

Special coatings and plastic materials, polypropylene included for centrifugal fans only, complete the range of executions.

How CBI matches fan to application

CBI’s selection starts from the application: engineers analyse the operating conditions, choose the fan family and series, then define the execution the environment requires. Engineered configurations are validated with CFD, FEM and in-house aeraulic testing before production. After installation, the Spares & Service Division follows the fan through its whole life, from commissioning and maintenance to revamping and spare parts, for CBI and third-party fans anywhere in the world. The result is a fan built to last.

Contact sent successfully!

Error sending contact! Try again!